NAT/Route mode installation
This chapter describes how to install your DFL-500 in NAT/Route mode. If you want to install the DFL-500 in
Transparent mode, see
This chapter includes:
·
Preparing to configure NAT/Route mode
·
Using the setup wizard
·
Using the command line interface
·
Connecting to your network
·
Configuring your internal network
·
Completing the configuration
Preparing to configure NAT/Route mode
When the DFL-500 is first powered on, it is running in NAT/Route mode and has the basic configuration listed
in
DFL-500 initial power on
DFL-500 initial power on settings
Operating Mode:
Administrator Account:
Internal Interface:
External Interface:
Customize NAT/Route mode settings
Use
NAT/Route mode settings
NAT/Route mode settings
Administrator Password:
IP:
Internal
Interface:
Netmask:
External
IP:
Interface:
Netmask:
DFL-500 User Manual
Transparent mode
installation.
settings.
User name:
Password:
IP:
Netmask:
IP:
Netmask:
Manual:
Default Gateway:
Primary DNS Server:
Secondary DNS Server: 207.194.200.129
to gather the information you need to customize NAT/Route mode settings.
NAT/Route
admin
(none)
192.168.1.99
255.255.255.0
192.168.100.99
255.255.255.0
(none)
207.194.200.1
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
18