Configuring A Windows 2000 Client For Pptp; Configuring A Windows Xp Client For Pptp - D-Link DFL-500 User Manual

·
Select OK twice.
Connecting to the PPTP VPN
·
Start the dial-up connection that you configured in the previous procedure.
·
Enter your PPTP VPN User Name and Password.
·
Select Connect.

Configuring a Windows 2000 Client for PPTP

Use the following procedure to configure a client machine running Windows 2000 so that it can connect to a
DFL-500 PPTP VPN.
Configuring a PPTP dial-up connection
· Go to Start > Settings > Network and Dial-up Connections .
· Double-click Make New Connection to start the Network Connection Wizard. Select Next.
·
For Network Connection Type, select Connect to a private network through the Internet and select Next.
·
For Destination Address, enter the external address of the DFL-500 to connect to and select Next.
·
Set Connection Availability to Only for myself and select Next.
· Select Finish.
· Select Properties in the Connect window.
·
Select the Security tab.
·
Uncheck Require data encryption.
·
Select OK.
Connecting to the PPTP VPN
· Start the dial-up connection that you configured in the previous procedure.
·
Enter your PPTP VPN User Name and Password.
·
Select Connect.
·
In the connect window, enter the User Name and Password you use to connect to your dial-up network
connection.
This user name and password is not the same as your VPN user name and password.

Configuring a Windows XP Client for PPTP

Use the following procedure to configure a client machine running Windows XP so that it can connect to a
DFL-500 PPTP VPN.
Configuring a PPTP dial-up connection
· Go to Start > Control Panel .
·
Select Network and Internet Connections.
·
Select Create a Connection to the network of your workplace and select Next.
·
Select Virtual Private Network Connection and select Next.
·
Name the connection and select Next.
· If the Public Network dialog box appears, choose the appropriate initial connection and select Next.
DFL-500 User Manual
78