Download
Share
Print this page
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Firewall
  5. DFL-200 - Security Appliance
  6. Quick installation manual

D-Link DFL-200 Quick Installation Manual

Network security
Hide thumbs Also See for DFL-200:

Advertisement

Quick Links

Download this manual See also: User Manual, Manual
This product can be set up
using any current web browser,
i.e., Internet Explorer 6 or
Netscape Navigator 6.
Before You Begin
If you purchased this Network Security Firewall to connect to your high-speed
Internet connection in a secure manner, you must have either an Ethernet-based
Cable or DSL modem with an established Internet account from an Internet Service
Provider (ISP).
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DFL-200 Network Security Firewall
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight Through) Cable
Console Cable (RS 232)
5V DC Power Adapter
specifications subject to change without notice.
1
DFL-200
Network Security
Firewall
Using a power
supply with a
different voltage
rating will damage
this product and void
its warranty.

Advertisement

loading

Related Manuals for D-Link DFL-200

Summary of Contents for D-Link DFL-200

  • Page 1 If any of the above items are missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
  • Page 2 1. Power off your Cable or DSL modem; some devices may not have a on/off switch and will require you to unplug the power adapter. Now, the DFL-200 should be powered on and the Cable / DSL modem should be turned off.

  • Page 3: Restart Your Computer

    Restart your computer To obtain a new IP address from the DFL-200 you wll need to restart your computer. Make sure that the network adapter in your computer is configured properly first. Instructions on how to configure the network adapter to obtain an IP address automatically from the DFL-200 can be found in the appendix.

  • Page 4: Using The Setup Wizard

    Enter or Return key. (The IP Address shown in the example above is the default setting. If you have changed the IP Address of the DFL-200 to conform to a network, then input that IP Address in the web browser, instead of...
  • Page 5 The Setup Wizard (continued) Welcome to the DFL-200 connec- tion wizard! Here you can choose to either configure your firewall over HTTP or over Secure HTTP (HTTPS). Click on Connect to the unit via HTTPS instead to use Secure HTTP...
  • Page 6 The Setup Wizard (continued) Step 3 - Configure WAN interface Select the appropriate configu- ration for the WAN interface, if you are unsure of which setting to select, please contact your Internet Service Provider. Click Next and continue to step 4 further down. If you are unsure of which setting to select, please contact your Internet Service Provider Click...
  • Page 7 The Setup Wizard (continued) Step 3 - Static IP If you selected Static IP you have to fill out the IP address information provided to you by your ISP. You will need to complete all the required fields except for Secondary DNS Server.
  • Page 8 The Setup Wizard (continued) Step 3 - PPTP If you selected PPTP you will need to specify both PPTP tunnel parameters and Physi- cal interface parameters. PPTP tunnel parameters: Enter the Username, Password and the PPTP Server IP address provided by your ISP. Physical interface param- eters: DHCP...
  • Page 9 The Setup Wizard (continued) Step 3 - Big Pond If you selected Big Pond you will have to fill out the user name and password provided to you by your ISP. Click Next and continue to step 4 further down. Click Next...
  • Page 10 (continued) Step 4 - Set up built-in DHCP server If you want to use the built-in DHCP Server in the DFL-200, choose Enable DHCP Server in this screen. You then need to specify a range of IP addresses to hand out to the DHCP clients.
  • Page 11 The Setup Wizard (continued) Setup Wizard Complete Click Restart to complete your configuration. Click Restart...
  • Page 12 To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically from the DFL-200 Network Security Firewall. Microsoft Windows XP: Go to Start > right click on My Network Places >...
  • Page 13 Network Select Built-in Ethernet in the show pull down menu Select Using DHCP the Configure pull down menu Click on Apply Now The IP address information, the Subnet Mask, the DFL-200 IP address and the Ethernet adapter address will appear...

  • Page 14: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.