D-Link DFL-500 User Manual page 125

DFL-500 traps
The DFL-500 agent can send traps to up to 3 SNMP trap receivers on your network that are configured to
receive traps from the DFL-500. The DFL-500 agent sends traps in response to the events listed in
traps .
SNMP traps
Event Description
System
The DFL-500 starts or restarts.
Startup
Invalid
The SNMP agent has received an SNMP request with an invalid community string.
Community
System
The DFL-500 shuts down.
Shutdown
Agent An administrator has disabled the SNMP agent from the web-based manager. The agent is also
Disabled automatically disabled before a system shutdown, and a trap is sent when this occurs.
An administrator has enabled the SNMP agent from the web-based manager. The agent is also
Agent Enabled
automatically enabled when the system starts up.
Configuring SNMP
To configure SNMP:
·
Go to System > Config > SNMP .
·
Select Enable SNMP.
·
Configure SNMP settings:
· Select Apply.
DFL-500 User Manual
SNMP
125