Changing Web-Based Manager Options; Adding And Editing Administrator Accounts - D-Link DFL-500 User Manual

·
Specify how often the DFL-500 should synchronize its time with the NTP server. A typical Syn Interval
would be 1440 minutes for the DFL-500 to synchronize its time once a day.
·
Select Apply.
Example date and time setting

Changing web-based manager options

You can change the web-based manager idle timeout and firewall user authentication timeout. You can also
change the language and character set used by the web-based manager.
To change web-based manager options:
· Go to System > Config > Options .
·
Set the web-based manager idle time-out.
Set the idle time-out to control the amount of inactive time that the web-based manager waits before
requiring the administrator to log in again.
The default idle time-out is 5 minutes. The maximum idle time-out is 480 minutes (8 hours).
·
Set the firewall user authentication time-out.
For more information, see
maximum Auth time-out is 480 minutes (8 hours).
·
Choose the character set and language that the web-based manager uses.
When the web-based manager language is set to use Simplified Chinese, you can change to English by selecting
the English button that appears on the upper right of the web-based manager.
·
Select Apply.
The options that you have selected take affect.

Adding and editing administrator accounts

When the DFL-500 is initially installed, it is configured with a single administrator account with the user name
admin. From this administrator account, you can add and edit administrator accounts. You can also control
the access level of each of these administrator accounts and, optionally, control the IP address from which
the administrator can connect to the DFL-500.
DFL-500 User Manual
Users and authentication. The default Auth time-out is 15 minutes. The
122