Table of Contents
Advertisement
Operating
Operating mode 'Dimmer'
30
A constant colour can only be activated when the unit is operating in stand-alone mode or as
master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
Press [Mode] repeatedly until the display shows 'Colr' . Press [Setup]. The display shows the set‐
ting for one of the primary colours (display shows 'r.xxx' , 'G.xxx' or 'b.xxx' ). Press [Setup] to
switch between the colours.
With [Up] and [Down] to set the colour intensity:
Display
'r.000' ... 'r.255'
'g.000' ... 'g.255'
'b.000' ... 'b.255'
LED lighting set
Description
Red
Green
Blue
Hide quick links:
Advertisement
Table of Contents
