Operating
DMX address
28
This setting is only relevant if the device is controlled via DMX.
Press [Mode] repeatedly until the display shows 'dxxx' .
Now you can set the number of the first DMX channel to be used by the device (DMX address).
Use [Up] and [Down] to select a value between 1 and 512 (the display shows 'd001' ... 'd512' ).
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible first DMX address for the various DMX modes.
Mode
2-channel
3-channel
4-channel
7-channel
8-channel
14-channel
LED lighting set
Highest possible DMX address
511
510
509
506
505
499