Table of Contents
Advertisement
Operating mode 'Preprog‐
rammed automatic show'
A preprogrammed automatic show can only be activated when the unit is operating in stand-
alone mode or as master in a master / slave combination. This setting is only relevant if the
device is not controlled via DMX.
Press [Mode] until the display shows 'Pr.xx' . Now you can select one of the preprogrammed
automatic shows. Use [Up] and [Down] to select a value between 'Pr.01' and 'Pr.14' .
Settings for programme 01:
For programme Pr.01, you can set one of fourteen static colours across all LEDs. Press [Mode]
and use [Up] and [Down] to select a desired colour (see following table). After selection, press
again [Mode]to set the flash frequency. With [Up] and [Down] you can now select a value
between 'FS.00' (slow) and 'FS.99' (fast).
Colour
Cyan
Purple
Pink
Orange
White
CLB2.4 Compact LED PAR System
Display
'9b'
'rb'
'rb'
'r9'
'rb'
Operating
25
Hide quick links:
Advertisement
Table of Contents
