Table of Contents
Advertisement
Starting up
DMX indicator
Connections in 'Master /
Slave' mode
20
If the unit is in DMX mode and a DMX controller is connected and turned on, the 'd' is flashing
in the first digit of the display.
When you configure a group of devices in 'Master / Slave' mode, the first device controls the
others and allows an automatic, music-controlled and synchronized show. This feature is espe‐
cially useful to start a show without much programming. Connect the DMX output of the
master unit to the DMX input of the first slave unit. Then connect the DMX output of the first
slave unit to the DMX input of the second slave unit and so on (maximum 30 slaves).
LED lighting set
Hide quick links:
Advertisement
Table of Contents
