S7: Meter Settings - FP Optimail30 Service Manual

Mailing system Optimail 30 – Service documentation

S7: Meter Settings

S1: High Postage Setting
Steps: Settings
The high postage warning can be programmed or switched off. For addition information refer to the
operating manual.
S2: Low Postage Warning
Steps: Settings
The Low postage warning can be programmed or switched off. For addition information refer to the
operating manual
S3: Meter Type
Steps: Settings
The meter can be switched between fractional (0.000) and non fractional (0.00) modes.
S4: Maximum imprints / day
Steps: Settings
The daily maximum number of imprints can be set. Default: 1500 (0 = deactivated)
S8: Reset
Resets factory defaults (apart from motor and print settings).
S1: Restore Delivery Settings
Steps: Settings
Selecting this feature resets all settings that the customer has made during the life of the machine e.g.
account names, phone number settings and so on. The service tech should only do this if requested by
the customer.
1 . 3 M a i n m e n u 3 :
1 . 3 M a i n m e n u 3 :
Meter Restarts. This is the easiest way to exit the service mode.
1 . 4 M a i n m e n u 4 :
1 . 4 M a i n m e n u 4 :
Here you have the possibility to view and print reports about the meter e.g. security device, error log, modem,
scale etc. However the option "All Information" allows information to be sent to the remote diagnostic server.
Overview
S1
S2
S3
S4
S5
S6
S7
S8
S9
Zac Moody/Andrew Nagel Revision June 2005 optimail30 service mode chapter2 (dealer)
Meter Settings High Postage Setting
Meter Settings Low Postage Warning
Meter Settings Meter Type
Meter Settings Maximum Imprints / Day
Reset Restore Delivery Settings
„ R e s t a r t "
„ R e s t a r t "
„ I n f o r m a t i o n a b o u t
„ I n f o r m a t i o n a b o u
System
Security Device
Error Log
Error Statistics
Scale
Rate Table
Ink Ribbon
Modem
All Information
t h e M e t e r "
t t h e M e t e r "
FRANCOTYP-POSTALIA
12
Page