Maintenance Schedule; Product Specifications - Matrix R1x Owner's Manual

MAINTENANCE
1. Any and all part removal or replacement must be
performed by a qualified service technician.
2. DO NOT use any equipment that is damaged and or has worn or broken parts.
Use only replacement parts supplied by your country's local MATRIX dealer.
3. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for
any reason. They contain important information. If unreadable or
missing, contact your MATRIX dealer for a replacement.
4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to
smooth operating equipment as well as keeping your liability to a
minimum. Equipment needs to be inspected at regular intervals.
5. Ensure that any person(s) making adjustments or performing maintenance
or repair of any kind is qualified to do so. MATRIX dealers will provide
service and maintenance training at our corporate facility upon request.
WARNING
To remove power from the exercise cycle, the power cord
must be disconnected from the wall outlet.

PRODUCT SPECIFICATIONS

R1x / R1xe
Max User Weight 182 kg / 400 lbs
Product Weight 82 kg / 181 lbs
Shipping Weight 100 kg / 220 lbs
Overall Dimensions 154 x 68 x 116 cm /
(L x W x H)* 60.8" x 26.7" x 45.6"
* Ensure a minimum clearance width of 0.6 meters (24") for access to and passage around MATRIX equipment.
Please note, 0.91 meters (36") is the ADA recommended clearance width for individuals in wheelchairs.

MAINTENANCE SCHEDULE

ACTION
Unplug the unit. Clean entire machine using water and a mild soap or
other Matrix approved solution (cleaning agents should be alcohol and
ammonia free).
Inspect the power cord. If the power cord is damaged, contact Customer
Tech Support.
Make sure the power cord is not underneath the unit or in any other area
where it can become pinched or cut during storage or use.
Clean underneath the cycle, following these steps:
• Turn off the cycle.
• Move the cycle to a remote location.
• Wipe or vacuum any dust particles or other objects that may have
accumulated underneath the cycle.
• Return the cycle to its previous position.
Inspect all assembly bolts and pedals on the machine for proper
tightness.
Clean any debris off of the seat guide rail.
For 7xe consoles, enter service mode and select 'test'. Select 'touch
calibration' and then select 'start'. Follow the on-screen prompts and touch
the screen where indicated.
U1x / U1xe
65 kg / 143 lbs
75 kg / 165 lbs
107 x 47 x 77 cm /
42" x 18.3" x 30.1"
FREQUENCY
DAILY
DAILY
DAILY
WEEKLY
MONTHLY
MONTHLY
QUARTERLY
19