WeiderPro 9400 User Manual

Hide thumbs

Table Of Contents

Quick Links

Download this manual

Enlarged version

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:

Unit 4

Revie Road Industrial Estate

Revie Road

Beeston

Leeds, LS118JG

Tel:

08457 089 009

Outside the UK: 0 (044) 113 387 7133

Fax: 0 (044) 113 387 7125

Please provide the following information when ordering replacement parts:

• The MODEL NUMBER of the product (WEEVSY39530)

• The NAME of the product (WEIDER

PRO 9400 weight system)

• The SERIAL NUMBER of the product (see the front cover of this manual)

• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING

attached in the centre of this manual)

Part No. 200195 R0803A

Model No. WEEVSY39530

Serial No.

Write the serial number in the

space above for future reference.

Serial Number Decal (Under Seat)

QUESTIONS?

As a manufacturer, we are

committed to providing com-

plete customer satisfaction. If

you have questions, or if there

are missing or damaged parts,

please call:

08457 089 009

Or write:

ICON Health & Fitness, Ltd.

Unit 4

Revie Road Industrial Estate

Revie Road

Beeston

Leeds, LS118JG

email: csuk@iconeurope.com

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S MANUAL

Class HC Fitness Product

Visit our website at

www.iconeurope.com

Table of Contents

Need help?

Do you have a question about the 9400 and is the answer not in the manual?

Questions and answers

Summary of Contents for WeiderPro 9400

Page 1: Ordering Replacement Parts
• The MODEL NUMBER of the product (WEEVSY39530) • The NAME of the product (WEIDER ® PRO 9400 weight system) Serial Number Decal (Under Seat) • The SERIAL NUMBER of the product (see the front cover of this manual) QUESTIONS? •...
Page 2: Table Of Contents
Leg Lever Swivel Low Cable (75) Cable (72) TABLE OF CONTENTS IMPORTANT PRECAUTIONS ..............3 BEFORE YOU BEGIN .
Page 3: Important Precautions
CABLE DIAGRAMS IMPORTANT PRECAUTIONS The cable identification chart below shows the ends of each cable and the lengths of the cables. The cable dia- grams on this page and the following page show the proper routing of the cables. The numbers in the diagrams WARNING: To reduce the risk of serious injury, read the following important precautions show the routes of the cables.
Page 4: Before You Begin
Customer Service Make sure all parts are properly tightened each time the weight system is used. Replace any worn parts immedi- 9400 weight system. The weight system offers an Department at 08457 089 009. To help us assist you, ately.
Page 5: Assembly
WEIGHT RESISTANCE CHART ASSEMBLY The chart below shows the approximate weight resistance at each weight station. “Top” refers to the 10-pound Make sure that you have the following tools: top weight. The other numbers refer to the 10-pound weight plates. The butterfly arm resistance listed is the Make Assembly Easier resistance for each butterfly arm.
Page 6: 1. Make Sure That You Understand All Of The
ADJUSTING THE SQUAT ARM, SEAT, OR FRAME ASSEMBLY BUTTERFLY BACKREST To adjust the height of the Squat Arm (32), first loosen the Adjustment Knob (115) on the Squat Bracket (37). Make sure that you understand all of the Next, pull the Handle and slide the Squat Bracket up information on page 5 before you begin or down to the desired position.
Page 7: Adjustments
4. Press a 38mm Square Inner Cap (67) into the ADJUSTMENTS Upright Extension (12). The instructions below describe how each part of the weight system can be adjusted. Refer to the exercise Attach the Upright Extension (12) to the Butterfly guide accompanying this manual to see how the weight system should be set up for various exercises.
Page 8: Troubleshooting
7. Press a 50mm x 75mm Inner Cap (58) into the top 61. Turn the Squat Backrest (35) so that the four screw of the Squat Upright (4). Press two 25mm Round holes are closer to the bottom of the Squat Outer Caps (121) onto the Upright.
Page 9 57. Press two 20mm x 40mm Inner Caps (116) and a 9. Attach a Roller (39) between the indicated set of 25mm x 40mm Inner Cap (117) into the Seat holes in the Squat Slider (38) with an M8 x 85mm Bracket (11).
Page 10 12. Attach the Top Frame (6) between the Squat Upright 53. Wrap the Squat Cable (73) under a 90mm Pulley (4) and the Swivel Upright (5) with four M10 x 95mm (78). Attach the Pulley and a pair of Pulley Covers Small Bolts (92), the two Short Frame Plates (52), and two (68) to the second set of holes from the top in the...
Page 11 49. Wrap the Swivel Low Cable (72) over a 90mm 16. Press a 40mm x 50mm Inner Cap (21) into the Right Pulley (78). Attach the Pulley and a pair of Pulley Butterfly Arm (26). Wet the lower end of the Arm and Lubricate Covers (68) between the lower set of holes in the a Long Pad (54) with soapy water.
Page 12: Swivel Cable (17)
19. Route the Swivel High Cable (74) through the Swivel 44. Wrap the Swivel Low Cable (72) over a 90mm Upright (5) and over a 115mm Pulley (119). Attach Pulley (78). Attach the Pulley and a pair of Pulley the Pulley inside the Upright with an M10 x 65mm Covers (68) to the Offset Double “U”-bracket (61) Bolt (18), two M10 Washers (91), two 12mm with an M10 x 50mm Bolt (100) and an M10 Nylon...
Page 13 24. Remove the preattached 90mm Pulleys (78) 39. Route the Leg Lever Cable (75) under a 115mm Pulley (119). Attach the Pulley and a pair of Large from the Offset Double “U”-bracket (61). Pulley Covers (113) to the indicated side of the Small Butterfly Upright (3) with an M10 x 95mm Bolt (92), Wrap the Swivel Cable (17) around a 90mm Pulley...
Page 14 34. Remove the preattached 90mm Pulleys (78) 29. Wrap the Lat Cable (88) around a 90mm Pulley (78). Attach the Pulley and a Cable Trap (102) to from the Double “U”-bracket (62). the Top Frame (6) with an M10 x 50mm Bolt (100) and an M10 Nylon Locknut (87).
Page 15 This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: 40mm x 50mm Inner Cap (21) Some parts may have been pre-assembled for shipping purposes.
Page 16 PART IDENTIFICATION CHART—Model No. WEEVSY39530 R0803A M10 x 50mm Bolt (100) M10 x 60mm Bolt (59) 12mm Spacer (89) M10 x 65mm Bolt (18) M10 x 45mm Bolt (93) M6 x 35mm Bolt (99) M10 x 65mm Carriage Bolt (110) 16mm Spacer (98) 50mm Washer (1) M10 x 70mm Bolt (85)
Page 17 PART LIST—Model No. WEEVSY39530 R0803A REMOVE THIS PART LIST/EXPLODED DRAWING FROM THE MANUAL. No. Qty. Description No. Qty. Description No. Qty. Description 50mm Washer Top Weight Lat Cable Short Base Swivel Carriage 12mm Spacer SAVE THIS PART LIST/EXPLODED DRAWING FOR FUTURE REFERENCE Butterfly Upright Butterfly Frame M8 Washer...
Page 18 EXPLODED DRAWING—Model No. WEEVSY39530 R0803A...