Kärcher BR/BD45/40C Bp Original Instructions Manual page 40

Over- Display (only BR/
load dis- BD...W...)
play
Perma- Pcb. Störung=4
nent light Pcb. fault=4
blinks Bürstm.Störung=1
once Brushmot.fault=1
Saugtb.Störung=1
Vac.mot. fault=1
Ventil.Störung=1
Valve fault=1
Fahrmt.Störung=1
Drivemot.fault=1
blinks Bürstm.Störung=2
twice Brushmot.fault=2
Saugtb.Störung=2
Vac.mot. fault=2
Ventli.Störung=2
Valve fault=2
Fahrmt.Störung=2
Drivemot.fault=2
blinks Heiss, abkühlen!
thrice Hot, let cool!
Saugtb.Störung=3
Vac.mot. fault=3
Bürstenüberlast!
Brush Overload!
Fahrmt.Störung=3
Drivemot.fault=3
blinks Prüfe Battspanng
four Check Battery!
times
Batteriefehler!
Battery fault!
Notaus-Schalter!
Emergency button
40
Faults with display
Fault
Defective electronics
Short circuit in the
brush motor
Short circuit in suction
motor
Short circuit in sole-
noid valve
Short circuit in driving
motor
Cable rupture in the
brush motor
Cable rupture in suc-
tion motor
Cable rupture in sole-
noid valve
Cable rupture in drive
motor
Temperature in the
electronics system is
high.
Overload suction mo-
tor
Overload on brush
motor
Overload drive motor
Battery voltage is not
between 17 and 33 V
Too high battery volt-
age while charging
Battery fault
Emergency-stop but-
ton has been pressed
while charging the bat-
tery.
16
-
EN
Remedy
Call customer service.
Call customer service.
Call customer service.
Let the electronics system cool
down for at least 15 minutes.
Turn the program selection
switch to OFF or Drive. Then
select again the cleaning pro-
gram. If the fault recurs, call
customer service.
Call customer service.
Stop charging. You can still use
the appliance; however, call
Customer Service
Release emergency-stop but-
ton. .