Kärcher BR/BD45/40C Bp Original Instructions Manual page 32

tergents the operator bears the increased
risk regarding the operational safety, acci-
dent risk and reduced product life of the ap-
pliance. Only use detergents that are free
from solvents, hydrochloric acid and hy-
drofluoric acid.
Follow the safety instructions for using de-
tergents.
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
Recommended detergents:
Application
Routine cleaning of all wa-
ter resistant floors
Routine cleaning of glossy
surfaces (e.g. granite)
Routine cleaning and ba-
sic cleaning of industrial
floors
Routine cleaning and ba-
sic cleaning of fine stone-
ware tiles
Regular cleaning of sani-
tary tiles or for cleaning af-
ter completion of
construction activities
Cleaning and disinfection
in sanitary areas
Removal of coating from
all alkali-resistant floors
(e.g. PVC)
Removal of coating from li-
noleum floors
Appliance without dosing equipment
(DOSE)
Press the lock upwards and open the
cover of the wastewater reservoir.
Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
play into the fresh water reservoir. Max-
imum temperature of the liquid 60°C.
Close the cover of the dirt water reser-
voir.
32
Appliance with dosing equipment
(DOSE, optional)
Detergent is added to the fresh water on
the way to the cleaning head with the help
of a dosaging device.
Note
1% detergent gets added via the dosing
equipment. For BR/BD...W... the dosing
can be set between 0 and 3%. For higher
dosing, you can add the entire quantity of
detergent to the fresh water tank.
The dosing equipment has been designed
for 2.5 litre detergent bottles.
Detergent
RM 780
RM 746
Risk of blocking on account of drying deter-
gent. The flow meter of the dosing equip-
RM 755 es
ment can stick on account of drying
detergent and hamper the functioning of
RM 69 ASF
the dosing equipment. Always rinse at the
end the fresh water tank and the appliance
with clear water. To rinse, open the regu-
RM 753
lating knob fully and set the cleaning pro-
gram with water at the programme
selection switch.
RM 751
RM 732
RM 752
RM 754
When the running gear is driven out the ap-
pliance can be pushed to the place of use
without any contact of the brushes with the
floor.
8
-
EN
Warning
Press the lock upwards and open the
cover of the wastewater reservoir.
Fill in water up to the MAX marking of
the filling level display into the fresh wa-
ter reservoir. Maximum temperature of
the liquid 60°C.
Close the cover of the dirt water reser-
voir.
Close the lid of the detergent bottle.
Slide the filter on the detergent suction
hose into the detergent bottle and
screw on the lid.
Swivel the handle of the detergent pick-
up upward and place the detergent bot-
tle into the pickup.
Swivel down the handle and lock it.
Driving to the Place of Use