Kärcher BR/BD45/40C Bp Original Instructions Manual page 35

Setting the Vacuum Bar
Oblique position
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.
Release the wing nuts.
Turn the vacuum bar.
Tighten the wing nuts.
Inclination
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
Release the wing nuts.
Tilt the vacuum bar.
Tighten the wing nuts.
Setting advance speed (only
Press the appliance to the bottom using
the push handle.
Turn the running gear to the front with
your foot.
Reducing the speed: Turn the button in
"–" direction.
Increasing the speed: Turn the button in
"+" direction.
Traction drive (only BR/BD...W...)
The appliance is equipped with an auxiliary
travel drive. The appliance can also be
moved by hand if necessary.
Programme selection switch in "Driv-
ing" position:
Release emergency-stop button by
turning.
Turn the main switch from position 0 to 1.
Switch on "traction" button.
Display and battery indicator display are
activated.
Press control switch.
The appliance accelerates and then drives
at the transport speed (4 km/h)
Release the control handle.
The appliance brakes.
Programme selection switch to cleaning
programme (position 2...6)
Release emergency-stop button by
turning.
Turn the main switch from position 0 to 1.
Display and battery indicator display are
activated.
11
-
EN
BD...C...)
35