Please read and comply with Function Environmental protection these original instructions prior The scrubbing vacuum cleaner is used for to the initial operation of your appliance and The packaging material can be the wet cleaning of level floors. store them for later use or subsequent own- recycled.
Operating and Functional Elements 1 Fluff filter 21 Mains cable with mains plug Colour coding 2 Safety button 22 Vacuum bar lowering lever – The operating elements for the cleaning 3 Drain hose for wastewater with dosing 23 Operator console process are yellow.
Before Startup Removal of coating from all RM 752 Operator console alkali-resistant floors (e.g. Unloading PVC) Employ 2 persons to lift the device off Removal of coating from li- RM 754 the pallet and set it on the floor. noleum floors ...
Care and maintenance Cleaning ATTENTION DANGER Risk of damage to the floor covering. Do Risk of injury! Set the programme selector not operate the appliance on the spot. switch to "OFF" and disconnect the mains plug prior to performing any work on the de- vice.
Insert new or reversed vacuum lips. Place a new disc brush on the floor in Maintenance contract Insert the plastic parts. front of the device. To ensure a reliable operation of the appli- Screw in and tighten the star grips. ...
Accessories Description Part no.: Description Disk brush, red (medium, standard) 4.905-022.0 For the use with all common cleaning tasks. Disk brush, natural (white) 4.905-023.0 Made of natural fibres for spot cleaning and polishing. Disk brush, black (hard) 4.905-025.0 For heavy soiling and for deep cleaning. For robust floorings only.