Sony CMT-PX5 Operating Instructions Manual page 42

Labelling an MD (continued)
To enter a blank space
1 Press NAME EDIT/SELECT to select
upper case or lower case letters.
2 Press 10/0.
A blank space is entered and the cursor
shifts to the right.
5
Repeat steps 3 and 4 to enter the rest of
the name.
To change a character
Press TCURSOR or CURSORt
repeatedly until the character to be changed
flashes, press CLEAR to erase the character,
then repeat steps 3 and 4.
6
Press ENTER/YES to complete the
labelling procedure.
The titles you labelled appear sequentially,
and then the original display appears.
To cancel labelling
Press MENU/NO.
42
Copying a disc or track title
You can copy a labelled disc or track title to use it
as a title of another track or the disc title within a
disc.
1 Press MENU/NO in stop mode.
2 Press – or + repeatedly until "Name?" appears,
then press ENTER/YES.
3 Press – or + repeatedly until "Nm Copy?"
appears, then press ENTER/YES.
4 Press . or > repeatedly to select "Disc"
(when copying the disc title) or the track
number with the title you want to copy, then
press ENTER/YES.
When "No Name" appears
The disc or track has not been labelled.
5 Press . or > repeatedly to select the copy
destination track number or "Disc" (when
copying as the disc title), then press ENTER/
YES.
When "Overwrite??" appears
The copy destination already has a disc or track
title. To continue and copy the title, press ENTER/
YES.
To cancel copying
Press MENU/NO.
Checking the titles
To check the disc titles, press SCROLL in stop
mode. To check the track title, press SCROLL
during play. The title appears scrolling in the
display. To stop scrolling, press SCROLL. Press
the button again to resume scrolling.