Sony CMT-PX5 Operating Instructions Manual page 36

Marking track numbers
(continued)
4,5
4,5
1
2
1
Press FUNCTION repeatedly until
"FM" or "AM" appears.
To record from other components connected
to this system, see "Connecting optional
components" (on page 61).
2
Press MD z REC to stand by for
recording.
3
Press MENU/NO repeatedly until
"Setup Menu" appears.
4
Press – or + repeatedly until "T.Mark
Off" (or "T.Mark LSync") appears, then
press ENTER/YES.
36
5
6
To change the trigger level for
4,5
automatic track marking
Perform the procedure below to change the signal
3,6
level that triggers automatic track marking.
1 Press MENU/NO during recording pause until
2 Press – or + repeatedly until "LS(T)" appears,
3 Press – or + repeatedly to select the level, then
4 Press MENU/NO.
To cancel automatic track
marking
Press – or + repeatedly until "T.Mark Off" appears
in step 5 above, then press ENTER/YES.
"L-SYNC" disappears. When "L-SYNC" is off, a
track number is marked only at the beginning of
each recording.
Press – or + repeatedly until "T.Mark
LSync" appears, then press ENTER/
YES.
"L-SYNC" lights up.
Press MENU/NO.
To continue and record, follow the
procedures described on the various
recording pages.
"Setup Menu" appears.
then press ENTER/YES.
press ENTER/YES.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB steps.