Basic Operations Playing A Cd - Sony CMT-PX5 Operating Instructions Manual

Basic Operations
Playing a CD
You can play up to 3 CDs in a row. To turn on the
system, press ?/1 (power).
?/1
4
(power)
s
CD 1 – 3
1
1
Press any CD 1 – 3 A and place a CD
on the disc tray.
With the label side
up. When you play
a CD single (8 cm
CD), place it on the
inner circle of the
tray.
Press the same A again to close the tray. To
load other CDs, press a different A and place
the CD on the disc tray.
2
Press FUNCTION repeatedly to switch
the function to CD.
VOLUME –l/L+
3 2 j/J
3
Press PLAY MODE repeatedly to select
playing of either ALL DISCS or
1DISC.
To start playing from the first track, press
PLAY MODE repeatedly until "SHUFFLE"
or "PROGRAM" disappears.
4
Press CD HS.
The CD HS button lights green, and play
starts from the CD whose CD 1 – 3 button is
lit green.
Disc tray number Playing time
Track number
To Do this
Press s.
Stop play
Press CD HS. The CD HS
Pause
button lights orange. Press again to
resume play.
Select a track Turn –l/L+ clockwise (to
go forward) or counterclockwise
(to go back).
Turn j/J during play and
Find a point in a
track release it when you reach the
desired point. "—OVER—"
appears at the end of the CD.
Select a CD • Press CD 1 – 3. The CD changes
automatically and the selected
CD starts playing.
• Press D.SKIP on the remote
repeatedly so that the CD 1 – 3
button is lit green. Press CD
HS to play the selected CD.
If you press CD 1 – 3 during
play, the CD changes
automatically and the selected
CD starts playing.
continued
9