Specifications - Sony CMT-PX5 Operating Instructions Manual

Table of Contents

Advertisement

CD
Check and CD Position appear alternately
The disc could not be read properly.
Complete!
CD editing operation (Disc Memo) is
completed.
File Full
There are already 100 disc titles stored in the
system.
No Disc
There is no disc in the CD player.
—OVER—
You have reached the end of the CD while
turning j/J clockwise during pause.
Push STOP!
You pressed PLAY MODE during play.
Step Full!
You tried to programme 26 or more tracks
(steps).

Specifications

Main Unit (HCD-PX5)
Amplifier section
Tourist model:
Continuous RMS power output (Reference):
20 + 20 watts (6 ohms at 1 kHz,
10% THD, 240 V)
Other models:
Continuous RMS power output (Reference):
20 + 20 watts (6 ohms at 1 kHz,
10% THD, 220 V)
Inputs
TAPE IN (phono jacks): voltage 250 mV, impedance
47 kilohms
DIGITAL OPTICAL IN (Supported sampling frequencies:
32 kHz, 44.1 kHz and 48 kHz)
ANALOG IN (stereo minijack):
voltage 250 mV, impedance
47 kilohms
Outputs
TAPE OUT (phono jacks):voltage 250 mV, impedance
1 kilohm
PHONES (stereo minijack):
accepts headphones of 8 ohms or
more.
SPEAKER:
accepts impedance of 6 to 16
ohms.
CD player section
System
Compact disc and digital audio
system
Laser
Semiconductor laser (λ=800 nm)
Emission duration: continuous
Max. 44.6 µW*
Laser output
* This output is the value
measured at a distance of 200 mm
from the objective lens surface on
the Optical Pick-up Block with a
7 mm aperture.
Frequency response
2 Hz – 20 kHz
continued
71

Advertisement

Table of Contents
loading

Table of Contents