Adjustments, Lubrication, Maintenance & Cleaning - Ransomes Super Certes 51 Safety, Operation & Maintenance Manual

3 SAFETY
3.1.5 Important Safety Notes _________________________________________________
This safety alert symbol is used to alert you to possible hazards.
DANGER:
Indicates a dangerous condition that WILL cause death or injury unless it is prevented.
WARNING:
Indicates a dangerous condition that CAN cause death or injury unless it is prevented.
CAUTION:
Indicates a dangerous condition that can cause injury and property damage unless it is prevented. Also, the label
can indicate work procedures that are not safe.
IMPORTANT:
Only drive the machine at road speed when you are on a highway. You must not select road speed on grass
areas or rough roads and gravel tracks.
Some illustrations in this manual can show shields, guards or plates removed for clearness. This equipment must
not be operated without these devices correctly fastened in position.
The Interlock System on this mower prevents the operation of the mower
unless a.) The parking brake is Engaged. b.) The mow switch is in the OFF
position, and c.) The traction pedal is in the Neutral position. The system
stops the engine when the operator leaves the seat a.) without the parking
brake engaged or b.) the mow switch in the OFF position. NEVER operate
the mower unless the Interlock System is working.
1. Before leaving the operator's position for any reason:
a. Return traction pedal to the Neutral position.
b. Disengage all drives.
c. Lower all implements to the ground.
d. Engage parking brake.
e. Stop the engine and remove the ignition key.
2. Keep your hands, feet, and clothing away from moving parts. Wait for all
movement to stop before you clean, adjust, or service the machine.
3. Keep the area of operation clear of all persons and animals.
4. Never carry any passengers, unless a seat is supplied for that purpose.
5. Never operate the equipment without a correctly fastened grass
deflector in position.
By following all instructions in this manual, you increase the life of your machine and keep its maximum
performance. Adjustments and maintenance must always be done by an approved technician.
If additional information or service is needed. Contact your Authorized Jacobsen Dealer, who knows the latest
methods to service this equipment and can give that service.
en-10
WARNING
WARNING