Advantech ark-3405 User Manual page 55

3.1.2.16 USB Configuration
 Legacy USB Support
Enables Legacy USB support. AUTO option disables legacy support if no USB
devices are connected. DISABLE option will keep USB devices available only
for EFI applications.
 XHCI Hand-off
This is a workaround for OSes without XHCI hand-off support. The XHCI owner-
ship change should be claimed by XHCI driver.
 EHCI Hand-Off
This is a workaround for OSes without EHCI hand-off support. The EHCI owner-
ship change should claim by EHCI driver.
 USB Mass Storage Driver Support
Enable/Disable USB Mass Storage Driver Support.
 USB transfer time-out
Time-out value for control, Bulk, and interrupt transfers.
 Device reset time-out
USB mass storage device start unit command time-out.
 Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. 'Auto' uses default value: for a Root port it is 100 ms, for a Hub port
the delay is taken from Hub descriptor.
45 ARK-3405 User Manual