Page 1
Installation Manual VVRD28V12MHDA VVRD28V12MHDAIR Please read this manual thoroughly before use and keep it handy for future reference.
Page 3
Norbain SD, 210 Wharfedale Road, Winnersh Triangle, Wokingham, Berkshire RG41 5TP, England. UK +44 (0) 118 912 5000 / Vista Technical Support +44 (0) 118 912 5125 Note: You should be at the equipment and ready with details before calling Technical Support.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings.
Chapter 2 — Installation and Configuration 2.1 Package Contents Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the colour camera and its accessories from the carton and verify that they were not damaged in shipment.
2.3 Tact Switch Operation & Connections The tact switch provides access to the OSD menu and zoom In/Out function on the motorized lens. Push centrally on the joystick and navigate using the up, down, left and right actions. If there is an arrow to the right of the menu function, this denotes that there is an accessible sub menu function Black BNC: CVBS Yellow BNC: TVI...
Chapter 3 — OSD Menu 3.1 Iris ALC (Auto Light Control): Lens control the iris ELC (Electronic Light Control): The camera controls the light, regardless of the ris 3.2 2-Motor AF MODE: Auto: will auto focus when zoomed in / out Manual: requires manual focusing via tact switch or DVR to focus SCANNING: Half: goes through the half range of lens when focusing...
3.7 DNR LOW, MIDDLE, HIGH 3.8 Image SHARPNESS: 0 – 20 GAMMA: 0.45, 0.55, 0.65, 0.75 MIRROR: Off / On FLIP: Off / On D-ZOOM: 1.0x – 16.0 (in 0.1 increments) SCANNING: Half: goes through the half range of lens when focusing Full: goes through full range of lens when focusing ACE: Off, Low, Middle, High DEFOG: Off / On...
3.9 Motion DET WINDOW: Window Use: 0 – 3 Window Zone: On / Off Det H-Pos: 0 – 60 Det V-Pos: 0 – 34 Det H-Size: 0 – 60 Det V-Size: 0 – 34 SENSITIVITY: 0 – 10 MOTION OSD: On / Off TEXT ALARM: On / Off SIGNAL OUT: On / Off (has no use as there is no output) 3.10 System...