Installing Outdoor Units - Midea MTA1-76HR Technical Manual

Midea R22 T1 side-discharge duct manual

3.3 Installing outdoor units


When installing the unit, leave a space for installation and maintenance shown in the following
figure. Install the power supply at the right side of the outdoor unit.

In case any obstacles exist above the outdoor unit, such obstacles must be 2000mm above the
outdoor unit.

If miscellaneous articles are piled around the outdoor unit, such articles must be 400mm below
the top of outdoor unit.

Use 4 steel ropes, diameter 6mm, or bigger size to hoist the outdoor uint and convey it into the
room.

In order to prevent scratch and deformity the outdoor unit, apply a guard board to the surface of
contact between the steel ropes and the unit.

Remove the cushion for using in the transport after finishing the transport.
18
Top view of the outdoor unit (single unit installed)
Top view of the outdoor unit (multiple units installed)
MCAC-RTSM-201301-01