Voice Mail Transfer Button Assignment - Panasonic KX-TVS50 Installation Manual

Conditions:

4.4.13 Voice Mail Transfer Button Assignment

This feature is used to transfer calls directly to a Voice Mailbox. It can be used with APT/DPT
or Inband Integration.
1.
Enter Station Programming:
For KX-TA624
With the phone on-hook, Set the MEMORY switch to "PROGRAM".
(Display changes to PITS-PGM Mode.)
For KX-TD series
a. With the phone on-hook, Press the Program button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the desired FLEXIBLE (CO or DSS/BLF) button that you want to assign as the VTR
button.
3.
Press [94](for KX-TA624) or [8](for KX-TD series).
Screen output: VTR
4.
Enter a Voice Mail extension number.
Screen output: VTR- _ _ _
(_ _ _ = The extension number you entered).
5.
Press STORE.
6.
Exit the program mode:
For KX-TA624
Set the MEMORY switch to "SET".
For KX-TD series
Press the PROGRAM button or lift the handset.
7.
Repeat these steps for each telephone.
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOG PBX AND KX-TD DIGITAL PBX
4.4 COMMON DIGITAL INTEGRATION FEATURES AND SETUP PROCEDURES
This button must be a CO or DSS/BLF button to be
programed as a TWT button. When all Voice Mail ports
are busy and this key is pressed, the user will hear
reorder tone.
91