Panasonic KX-TVS50 Installation Manual page 217

Parameter
No Answer
Coverage
Mode
Operator's Parameters - Day Mode - Operator 3
Operator-seeking calls to Operator 3, when Operator 2 is busy or unanswered and Operator 2's
parameters are set as follows.
• Busy Coverage Mode - No Answer Coverage
• No Answer Coverage Mode - next Operator
To select Operator Parameters - Day Mode - Operator 3, follow the menu path as
shown:
System Administration Top Menu - 1 - 4 - 1 - 2 - 1 - 3
Parameter
Operator's
Extension
Operator's
Mailbox No.
SYSTEM ADMINISTRATOR'S GUIDE
Value Range
(Default)
1. Caller Select Specifies how Operator 2 calls are handled when not
2. Leave Message answered within the time period set through the
3. Disconnect "Operator No Answer Time" mode.
Message
4. Next Operator
1. Caller Select - This selection allows the caller to leave
(Caller Select)
a message or call another extension.
2. Leave Message - The caller is instructed to leave a
message in Operator 2's mailbox.
3. Disconnect message - The caller is disconnected after
playing "Thank you for calling."
4. Next Operator - The system transfers the call to
Operator 3.
Value Range
(Default)
1-5 digits Used to select the extension number for Operator 3. Any
(None) valid extension number can be assigned.
2-5 digits Used to specify the mailbox number for Operator 3.
(None) Callers to Operator 3 are prompted to leave a message in
this mailbox depending upon how the Busy Coverage or
No Answer Coverage modes are set.
B5 SYSTEM ADMINISTRATION - SERVICE SETTINGS
Table 42
Description/Function
Table 43
Description/Function
217