C3 Setting Cos (Class Of Service) Parameters - Panasonic KX-TVS50 Installation Manual

C3 SETTING COS (CLASS OF SERVICE) PARAMETERS

C3 SETTING COS (CLASS OF SERVICE)
PARAMETERS
Class of Service defines the set of VPS services available to Subscribers. A maximum of 64
Class of Services can be established. Each Class of Service can be set using the telephone. COS
No. 63 and No. 64 are assigned to the Message Manager and the System Manager respectively.
For a complete explanation of COS parameters, please see Table 37 and Table 38 in Appendix
B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE)
PARAMETERS.
The Class of Service parameters listed below are set by following the procedure steps listed:
• Personal Greeting Length - Length ranges from 8-60 s in 4 s increment.
*1
• New Message Retention Time - Maximum time is 30 days.
• Saved Message Retention Time - Up to 30 days/0: Unlimited.
• Message Length - Length ranges from 1-6 min.
• Number of Messages - The number of messages range from 5-100.
• Total Message Time - Total message time ranges from 5-100 min.
• Message Retrieval Order - Settings are LIFO (last in first out) or FIFO (first in first out).
• Message Scanning with Information - Settings are enable or disable.
• Play System Prompt after Personal Greeting Status - Settings are enable or disable.
*1
• Call Waiting on Busy Status - Settings are enable or disable.
*1
• Message Cancel for Live Call Screening Status - Settings are enable or disable.
*1
• Direct Mailbox Access Status - Settings are enable or disable.
*1
• Intercom Paging Group Number - 1-9
*1
• Subscriber Service Prompt Mode
• Number of Caller IDs for Personal Caller Name Announcement - 0-30
*1
• Play Personal Greeting for Caller ID - Settings are enable or disable
*1
• Caller ID Screening - Settings are enable or disable
*1
• Message Notification Status - Settings are enable or disable
*2
• External Message Delivery Status - Settings are enable or disable
*1
• Auto Forwarding Status - Settings are enable or disable
*1
Not available for COS No.63 (Message Manager) and COS No.64 (System Manager)
*1
Not available for COS No.64 (System Manager)
*2
Note
While the System Administrator programs via a computer, the System Manager cannot
set COS parameters and "Sorry, this function is not available." is played.
262
1. System Prompt
2. User 1 Prompt
3. User 2 Prompt
SYSTEM MANAGER'S GUIDE