Panasonic KX-TVS50 Installation Manual page 214

B5 SYSTEM ADMINISTRATION - SERVICE SETTINGS
To select Operator's Parameters, follow the menu path as shown:
System Administration Top Menu - 1 - 4 - 1 - 2
Operator's Parameters - Day Mode - Operator 1
This parameter is used to enable or disable the Operator Service. It specifies Operator 1's
extension and the treatment of the calls transferred to that extension. The assigned extension
number for Operator 1 in the Day Mode will be for the Message Manager. When Operator
service is enabled, operator-seeking calls are first transferred to Operator 1's extension.
To select Operator Parameters - Day Mode - Operator 1, follow the menu path as
shown:
System Administration Top Menu - 1 - 4 - 1 - 2 - 1 - 1
Parameter
Operator
Service
Operator's
Extension
Operator's
Mailbox No.
214
Value Range
(Default)
1. Disable Used to turn the Operator Service feature on or off.
2. Enable
(Enable)
Note: All no-DTMF-input calls in Automated Attendant
Service are transferred to the General Delivery Mailbox
when the Operator Service is disabled.
1-5 digits Used to select the extension number for Operator 1.
(0)
Note 1: The default setting (0) cannot be used with the
Message Waiting Notification - Lamp feature. An
extension number must be assigned that is included in the
Extension Numbering Plan.
Note 2: The extension number must be an unassigned one.
2-5 digits Callers to Operator 1 are prompted to leave a message in
(998) this mailbox depending upon how the Busy Coverage or
No Answer Coverage modes are set.
Table 41
Description/Function
SYSTEM ADMINISTRATOR'S GUIDE