User Tasks; Overview - Siemens SIMATIC IPC427C User Manual

User tasks

4.1

Overview

This section covers the following topics:
● "Creating the STEP 7 project and configuring the hardware" (Page 26):
● "Configuring the Windows Ethernet Interface" (Page 29): This topic explains the locations
● "Configuring the WinCC flexible Project" (Page 31): You must configure your
● "Downloading PC Station components" (Page 32): This topic explains what to do if you
● "Managing the Enhanced Write Filter" (Page 35): The Enhanced Write Filter (EWF) is a
● "Creating a System Image" (Page 37): After you have configured the
SIMATIC IPC427C Bundles, SIMATIC HMI IPC477C Bundles
Manual, 07/2009, A5E02280126-02
This topic describes how to create a project, add a PC Station (-RTX/RTX F) or
HMI Station (-HMI/RTX) to it, and configure the hardware configuration to correspond to
the default configuration of the SIMATIC Embedded Bundle.
of the Ethernet connections and how to configure the IP addresses for these connections.
WinCC flexible project with the WinCC flexible ES (engineering station) software, and
transfer this project from the engineering station computer to WinCC flexible RT on the
SIMATIC Embedded Bundle. This topic describes how to change the WinCC flexible RT
settings on the SIMATIC Embedded Bundle after this transfer is complete.
need to change and download the configuration of the PC Station (for example, if you
want to add WinCC flexible to the configuration, or if you want to download the
OPC Server configuration).
Windows Embedded utility for protecting a CompactFlash card. CompactFlash cards
allow a limited number of write accesses. This topic describes how to use the
EWF manager.
SIMATIC Embedded Bundle for your application, you can create an image of your
system. If necessary, you can use this image later to restore your custom application to
your system. This topic explains how to perform this task.
4
25