Introduction - Siemens SIMATIC IPC427C User Manual

Introduction

Purpose of the documentation
This documentation describes the unique features and pre-installed system configuration of
the following SIMATIC Embedded Bundles:
● SIMATIC IPC427C-HMI
● SIMATIC IPC427C-RTX
● SIMATIC IPC427C-HMI/RTX
● SIMATIC IPC427C-RTX F
● SIMATIC HMI IPC477C-HMI
● SIMATIC HMI IPC477C-RTX
● SIMATIC HMI IPC477C-HMI/RTX
● SIMATIC HMI IPC477C-RTX F
Definition
In this documentation, the following terms are used to specify the different pre-installed
system configuration of the following SIMATIC Embedded PCs:
● SIMATIC Embedded Bundles: This term is used to mean both PCs,
● SIMATIC IPC427C Bundles: This term is used to mean the PC alone with all its possible
● SIMATIC HMI IPC477C Bundles: This term is used to mean the PC alone with all its
● Windows Embedded: This term is used to mean the
● Distributed I/O: This term is used to mean PROFIBUS and PROFINET.
Target group
This documentation is intended for engineers, programmers, and maintenance personnel
with general knowledge of automation systems and programmable logic controllers.
SIMATIC IPC427C Bundles, SIMATIC HMI IPC477C Bundles
Manual, 07/2009, A5E02280126-02
the SIMATIC IPC427C and the SIMATIC HMI IPC477C with all possible pre-installed
system configurations.
pre-installed system configurations.
possible pre-installed system configurations.
"Windows Embedded Standard 2009" operating system.
1
5