4-11. White Balance Calibration Instruction
A. Preparation for calibration
A-1. Version Matching of Video Wall Monitor F/W and SuperSign C for Working Compatibility
Models
SOC
F/W
version
Micom
Models
SOC
F/W
version
Micom
SuperSign C
NOTE(Very Important!)
If the F/W version is lower than ones above you must update
A-2. Setting for calibration
SuperSign C
(1) IR receiver is needed for manual adjustment
(2) 'Set ID' setting must be done before calibration.
(3) Before calibration, it is necessary to turn on the monitor at least 2 hour.
55LV77A-7BL, 55LV77A-5BL, 55LV75A-7BL, 55LV75A-5BL 47/55LV35A all
3.00.10 or later
1.19.8 or later
55WV40MS
3.24.03 or later
1.14.3 or later
RS232C
55WV70MD
47WV50BR
3.01.22 or later
3.00.14 or later
3.02.5 or later
1.17.1 or later
2.1.1.0
3.00.01 or later
8.02.0 or later
47WV30 all
3.10.20 or later
2.05.2 or later
: RS-232C connection
(out→in)
48