1-2. Consider using a cooling & heater solution (Mandatory)
To maintain the temperature inside the enclosure, you should consider using a cooling
and heater solution such as an air conditioner, heat exchanger, or combined cooler
and heater depending on the external environment. (Please see below examples)
You could also employ an air flow circulation system and air curtain* between the front
panel and the enclosure.
Recommend to design the exterior of the enclosure to meet with the IP65 standard.
Use a dust filter to prevent dust .(At air inlet and outlet )
Example 1 : Enclosure (Just fans)
Air Curtain
Example 3 : Enclosure (Air conditioner)
Air Curtain
*Air curtain :
Air flow circulation system between
the front panel and the enclosure.
Example 2 : Enclosure (Heat exchanger)
Air Curtain
Example 4 : Direct Air Cooling Solution
Protection
glass
Air Curtain
Heater
Filter should be used for filtering out bugs, dust and water.
For preventing from rust of lead frame in circuit board,
operates the Heater if relative humidity is high.
Humidity Sensor
FAN
Membrane Filter
6