LG 26TS30MF Installation Manual page 55

E. Appendix 3 : Auto Set ID Guide
(Only 47LV35A, 55LV35A, 55LV55A, 55LV75A, 55LV77A)
E-1. Two ways of Auto Set ID
1) By using SuperSign C
1
Select the 1st monitor daisy chained by RS-232C and Click the Auto SET ID button
2
Monitor executes Auto Set ID.
3 Reassign Set ID number in SSC like below
2) by using user remote controller
1 Select "Set ID Setup" in Installation Menu
Execute "Auto Set ID".
2
E-2. Before & After Auto Set ID
Before) Connect IR Receiver and RS232
Cable such as shown in the following picture.
After) Set ID of all sets is sequentially set by
RS232 connection order automatically.
55