Displaying The Device Name Connected To An Input Port; White Balance Adjust Menu - LG 32SE3D Owner's Manual

26

Displaying the Device Name Connected to an Input Port

Display which devices are connected to which external input ports.
1
Access the Input list screen and press the red (input label) button on the remote control.
2
You can assign an input label for every input except USB.
NOTE
• External inputs supported: HDMI, DVI-D
• Labels available: PC, DTV
• The input labels are displayed on the Input Label screen or at the top left of the screen when you change the external
input setting.
• For DTV/ PC-compatible signals, such as 1080p 60 Hz, the screen settings may change according to the input label.
The Just Scan option is available if a PC is connected as an external device.

White Balance Adjust Menu

Press the button on the remote control.
• R-Gain: Adjusts the level of red. The higher the number, the redder the set. Decrease the number if the screen looks
too red.
• G-Gain: Adjusts the level of green. The higher the number, the greener the set. Decrease the number if the screen
looks too green.
• B-Gain: Adjusts the level of blue. The higher the number, the bluer the set. Decrease the number if the screen looks
too blue.
• Backlight: Adjusts the brightness. The higher the number, the brighter the set. This works in the same way as the
backlight of the user menu.
• Reset: Resets the white balance value to the factory settings.