LG 26TS30MF Installation Manual page 88

7-3. How to connect the OPS with KT-OPSA
 LGE provides KT-OPSA (OPS kit) as an accessory and it can be used with Intel OPS
 OPS means "Open Pluggable Specification" and it comply with Intel OPS specifications
 If you want to use the Intel OPS with our product, please refer to below guidance
A. Applied Models
• 42/49/55LS75A
B. How to connect the OPS with KT-OPSA
Lay a clean cloth on the floor, put the monitor
1
on it with the screen facing downward, and then
remove the screws from the OPS hole cover on
the rear of the monitor with a screwdriver.
OPS Hole Cover
3
Align the KT-OPSA along the four screw holes
on the rear of the set and attach it to the rear
of the set using the four screws provided.
KT-OPSA
2
Lift the left side of the OPS hole cover.
Remove the cover.
4
Open the top cover of the KT-OPSA
and connect the cable provided to the
connector inside the set and the connector
on the KT-OPSA.
Connector on
the KT-OPSA
Connector inside the set
88