1-4. Check Screw hole depth to avoid LCD panel
damage(Mandatory)
47WX50MF
47WX50MF
Side Hole
You must use the side screw holes when mounting the panel
The Side screw holes are M4.0 Tap , Torque 4~5Kgf.cm, pitch 0.7mm
The Screw hole depth of the panel is: 9.0mm (Max)
If a screw is longer than 9.0mm, it may cause damage to the LCD panel
It is advisable to only use spring washer-type screws.
▪Example : Spring washer type
8