LG 26TS30MF Installation Manual page 45

4-8. Setting the Picture ID (2/2)
1 1. Press the ID On (Red) button
on the remote control.
 If you assign the Set ID to each set with multi-vision, and then assign the Picture ID
using the red button on the remote control, the key command is displayed for the set
with the same Set ID and Picture ID. A set with different Set IDs and Picture IDs cannot be
controlled by IR signals.
 Refer to the Set ID on page 46 for assigning a Set ID.
 The maximum value of the Picture ID can be set in the Total Set ID menu.
 Please refer to the Installation Manual for more information on the assignment of a Total Set ID
NOTE
 For example, if the Picture ID is assigned to 2, the upper right display (Set ID: 2) can be
controlled by IR signals.
 For each set, you can change the settings for the PICTURE, AUDIO, TIME, OPTION, NETWORK
and MY MEDIA menus or the hot keys on the remote control.
 If you press the ID OFF (Green) button, the Picture IDs for all sets are turned off
If you then press any button on the remote control, all sets will start working again
 The Picture ID function may not work during MY MEDIA operating.
2 If you press the left/right buttons or press
2
the ON button repeatedly, the Picture ID
cycles through OFF and 1 to 4.Assign the
ID you want.
45