Setting Outdoor Stations And Cameras - Bticino Terraneo Instructions For Use And Installation Instructions

4 PROGRAMMING

4.4 SETTING OUTDOOR STATIONS AND CAMERAS

This command configures the system outdoor stations and cameras.
The table "Type of OS" field defines whether the OS is riser or dedicated OS0:
- if configured as riser (1), the number of door entry OS (from 01 to 15) will be indicated in the
next field;
- if configured as OS0 (2) the next field will indicate whether Audio or Video.
Type of OS:
Riser or OS0
0
None
1
Riser
79
2
OS0
3
sep. camera
9
does not change
* Only with Video expander item 335925
Example:
To configure a system with OS0 video, OS1 audio, OS2 video and no camera, proceed as
follows
•
Lift the receiver
•
#
Type:
•
Type the access code (e.g. basic
•
After the start-dialling tone type the Macrocommand:
•
When you hear the confirmation tone hang up
Telephonic system
Total riser OS /audio
or video OS
01 04
from to analog
01 15
from to digital
00
audio OS0
01
video OS0
99
does not change
#
1
7 9 2
Dedicated OS1 Dedicated OS2 Separate camera
0 0
none none
1 1
audio OS audio OS
2 2
video OS video OS
3 3
sep. camera sep. camera
9 9
does not change does not change
2 3 4
)
0 1 1 2
16
on the expander
0
none
1
present
9
does not change
0 #