Call Using The Alias (Alphanumeric Code); Call Using The Phonebook; Lift Control Function; Fire Linkage - Bticino 374000 User And Installation Manual

Hide thumbs Also See for 374000:
Table of Contents

Advertisement

Call using the Alias (alphanumeric code)

The alphanumeric code, by default, is the same address as in the Community but it is possible to
replace it with an alias using the SW. For more details see the Software manual.
Example:
1 1 01 04 02

Call using the Phonebook

In this way it is possible to use the phonebook key and select the contact to call or it is possible
to make a call by typing the code (Alias), with the advantage that during typing the system will
autocomplete the address; see the software Manual for more detail.
Example:
1 1 01 04 02

Lift control function

The Lift control function allows a command to be sent to the lift control centre to simulate a lift
call.
The lift action depends on the functions of the lift control unit (BTicino cannot define these
functions. They depend on the lift manufacturers).
It is necessary to enable the function in
It is possible to display some wiring diagram examples in the
For more information, see the «Lift Control Interface item 375010 software manual».

Fire linkage

It enables the door lock opening function in case of fire.
The Fire linkage function allows the automatic opening of EP door locks in the event of a fire.
The use of this function requires a clean contact in the GND FIRE LINKAGE input clamp from the
fire fighting system.
It is necessary to enable the function in

CCTV cameras

CCTV cameras for passive video surveillance.

Address book

Phonebook, created using the SW, containing the addresses of all the system devices.
Function
Call time after which the
video door entry answering
machine* activates
Duration of communication
time
Unlock time
Screen saver
*setting the RINGTONE DURATION time on the IU at less than 30 seconds, the answering machine does
not activate
B12
JOHN SMITH
Settings/setting
Setting
TIMES
Default time
30 seconds
60 seconds
5 seconds
30 seconds
7
Entrance Panel 10"
User and installation manual
Example diagrams/lift control
Customisation using SW
not customisable
From 60 to 120 seconds
From 2 to 255 seconds
30 - 60 - 120 - 300 – 600
seconds
section

Advertisement

Table of Contents
loading

This manual is also suitable for:

374002

Table of Contents