Basic Functions Of The Video Door Entry Unit; Switching On The Monitor - Bticino Terraneo Instructions For Use And Installation Instructions

2

BASIC FUNCTIONS OF THE VIDEO DOOR ENTRY UNIT

2.1 SWITCHING ON THE MONITOR

When there is a door entry call, the monitor of the main IS switches on and the other devices
ring (if enabled for the door entry call). If the answer is from the other video door entry telephone,
the speaker and video connection is automatically transferred.
When the main IS monitor is on press the
receiver, to transfer the image to its monitor.
To switch both monitors on at the same time connect an extra power supply item 336010 to
the video Distributor.
General connection diagram
230V a.c.
50-60Hz
PRI C NO a b a b
1 2
Exchange
335818
335828
U1 U2
a b a b
To the analog or digital
floor distribution (riser OS)
Note: Both monitors can be switched on at the same time by
installing the extra power supply, with any system layout.
Max 200 metres
a b a b a b a b a b a b
3 4 5 6 7 8
3 4 M P T R
Max 1 metre
Digital
To be set depending
on the type of riser
Analog
230V a.c.
50 Hz
230V 50Hz
1
1 2 3 4 5 6
®
key of the other IS, without lifting the
1.............. 4.............. 7..............
2.............. 5.............. 8..............
3.............. 6.............. 9..............
An PS 3 4 M P T R a b a b 1 2 3 4 7 8 1 2 3 4 7 8
1
Dg
- + 1 2
Video distributor
335918
2 1
7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6
7
MAIN IS
Max 200 metres
Max 200 metres
2
2
7 8
Max 200 metres