Wall-Mounted Installation - Bticino Terraneo Instructions For Use And Installation Instructions

8 INSTALLATION OF THE VIDEO DOOR ENTRY TELEPHONES

8.2 WALL-MOUNTED INSTALLATION

•
To install wall-mounted video door entry telephones, connect the unbraided wire (1) supplied
with the Pivot telephone following the correspondence between the terminals of the
Distributor (or Expander) and the conductor colours as indicated in the table.
UNBRAIDED CABLE
DISTRIB.
TERMINAL
CABLE No.
1 1
2 2
3 3
4 4
5
6
7 7
8 8
IMPORTANT: Make a jumper between terminals 2 and 5 of the video door entry telephone.
8.3 TABLE INSTALLATION
•
To install table-mounted video door entry units, using the 8-way jack, connect terminal 1 of
the Distributor (or Expander) to terminal 1 of the jack, 2 to 2 etc.
IMPORTANT: Make a jumper
between terminals 2 and 5 of
the jack.
item 336982
336983
336984
DISTRIB. JACK
TERMINAL TERMINAL
1 1
2 2
3 3
4 4
5
6
7 7
8 8
Telephonic system
FUNCTION
COLOUR
YELLOW GND
GREEN +V
TEL. LINE
BLUE
WHITE TEL. LINE
BROWN BELL
RED ON
BLACK VID -
GREY VID +
8 7 6 5
1 2 3 4
1 2
3 4
FUNCTION
GND
+V
TEL. LINE
TEL. LINE
BELL
ON
VID -
VID +
1
58
336813
item