Door Lock On Riser Activation Time; Programming By Personal Computer - Bticino Terraneo Instructions For Use And Installation Instructions

4 PROGRAMMING
4.6

DOOR LOCK ON RISER ACTIVATION TIME

This command can program how long the door lock relay is active on systems connected to
analog or digital systems (base 2 seconds).
Example:
To activate the door lock relay for 10 seconds, proceed as follows:
•
Lift the receiver
•
#
Type:
•
Type the access code (e.g. basic
•
After the start-dialling tone type the Macrocommand:
•
When you hear the confirmation tone hang up
4.7

PROGRAMMING BY PERSONAL COMPUTER

All the functions described and others as well can be programmed by Personal Computer.
Use the special TiPBX software, version 3.1 or later, which can be downloaded free from the
Internet site: www.bticino.it in the technical software section.
For the connection use cable item 335919 to be connected to the IOIOI seat of the PABX
exchange and to a serial port (COM1 – COM2) of the personal Computer.
After programming take the cable out of the IOIOI seat before switching on the exchange.
Telephonic system
Duration of activation
0
= 2 seconds
81
1
= 10 seconds
#
1 2 3 4 )
#
18