Software Update - T+A R 1000 E User Manual

Software update generally:
Updating via the Internet

Software update

Software updates keep your R 1000 E up-to-date. They bring new optimisations
like faster opearation and new features which were not available at the time the
device was produced.

It may occur that after a software update some of your user defined settings like
network parameters or favourite stations are lost and have to be restored after
the update.
Updating the firmware via the R 1000 E's Internet connection

The basic requirement is a functioning network with router and access to a
broadband Internet connection; the system must be operating.

Switch the machine on.

Call up the system configuration menu by pressing the  button on the
front panel.

Use the  /  buttons to select the "Device info" menu item,
and confirm your selection by pressing the  button.

Select the "Update" menu point with the  /  buttons, then
press the  button to confirm your choice.

The Select option "WEB" should now be active (highlighted).

The firmware update can now be started by pressing .

The screen displays the current state of progress of the update.

Once the update has been completed (duration around ten minutes) the
device automatically switches itself off and restarts.

When the machine has restarted, the update is complete.

To ensure that the update was successful, access the "Device Info" menu
point mentioned above, and check the new firmware status.

It is also possible to carry out the update process using the FM1000 remote
control handset, as an alternative to operating the machine directly.
63