Usb Dac Operation In Detail; System-Requirements; Installing Drivers; Settings - T+A R 1000 E User Manual

System-requirements

Installing drivers

Settings

Notes on software

Notes on operation

Notes on setting up

USB DAC operation in detail


Intel Core i3 or higher or a comparable AMD Processor.

4 GB RAM

USB 2.0 Interface

Microsoft Windows Vista, Microsoft Windows 7 / 8

or MAC OS X 10.6.+
If the R 1000 E is used in conjunction with the operating systems listed, then no
drivers need to be installed. If no drivers are installed, it is possible to play PCM
streams up to 96 kHz.
If an ASIO driver is installed, DSD streams at 2.8 MHz (DSD64) can also be
played under Windows.

The drivers required, together with detailed installation instructions including
information on audio playback via USB, are available for downloading from our
website at http://www.ta-hifi.com/R1000E-software
A number of the PC`s system settings have to be altered if you wish to operate
R 1000 E with your computer. These changes must be made regardless of the
operating system. The installation instructions provide detailed information on
how and where the settings are to be changed.
 To play DSD files it is necessary to switch on the "USB-DSD playback" option
in the System Configuration menu of the R 1000 E. For more information please
see the section entitled "Basic settings of the R 1000 E".
If you wish to play only PCM coded audio material, the setting should be set to
"off".
 By default, the operating systems listed above do not support 'native' music
playback. This means that the PC always converts the data stream to a fixed
sample rate, regardless of the sample rate of the file to be played. Separate
software is available - e.g. J. River Media Center or Foobar - which prevents the
operating system converting the sample rate.
The installation instructions included in the driver package contain further
information on audio playback via USB.

To prevent fail functions and system crashes of your computer and the playback
program, please note the following:

For Windows OS: Install the driver before you use the R 1000 E for the first
time.

Use only drivers, streaming methods (e.g. WASAPI, Directsound) and
playback software which are compatible to your operating system and
between each other.

Never connect or disconnect the USB connection while the system is
running.

Do not set up the R 1000 E on or immediately adjacent to the computer to
which it is connected, otherwise the device could be affected by interference
radiated by the computer.
41