About These Instructions - T+A R 1000 E User Manual

About these instructions

All the controls and functions of the R 1000 E which are frequently used are described in the first section of these
operating instructions.
The second part 'Basic settings, Installation, Using the system for the first time' covers connections and settings
which are very seldom required; they are generally required only when the machine is set up and used for the first time.
Here you will also find a detailed description of the network settings required for connecting the R 1000 E to your home
network.
Symbols used in these instructions
Caution!

Text passages marked with this symbol contain important information which must be observed if the
machine is to operate safely and without problems.

This symbol marks text passages which provide supplementary notes and background information; they
are intended to help the user understand how to get the best out of the machine.
italic Technical terms printed in italics are explained in detail at the end of the instructions.
Notes on software updates
Many features of the R 1000 E are software based. Updates and new features will be made available from time to time.
The update process takes only a few minutes. See the chapter entitled "Software update" for how to update your device
via the internet connection.
We recommend you to check for updates before using your R 1000 E for the first time. To keep your device up to date
you should check for updates from time to time.
IMPORTANT! CAUTION!
This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or
attempt to gain access to the inside of the product.
Refer all servicing to qualified personnel.
The following caution labels appear on your device:
Rear Panel:
CLASS 1
LASER PRODUCT
All the components we use meet the European safety norms and standards which are currently valid. The ope-

ration instructions, the connection guidance and the safety notes are for your own good - please read them
carefully and observe them at all times.
This product complies with the Low Voltage Directive (2014/35/EU), EMV Directives (2014/30/EU) and the Eco Design
Directive (2009/125/EG).
4