Language; Device Name; Energy Saver; Network - T+A R 1000 E User Manual

Language

menu item

Device name

menu item

Energy saver

menu item

Network

menu item

Music services

menu item
16
In this menu point you define the language to be used for the displays on the
screen of the front panel of the R 1000 E.
The language used for data transferred to the machine, e.g. from an iPod or
other Internet radio station, is determined by the supplying device or the radio
station; you cannot define the language on the R 1000 E..
This menu point can be used to assign an individual name to the R 1000 E. In a
home network the device then appears under this name.
The R 1000 E features two stand-by modes: ECO Standby with reduced stand-
by current drain, and Comfort Standby with additional functions, but slightly
higher current drain. You can select your preferred stand-by mode in this menu
point:
On (ECO standby):
Active functions in ECO standby mode:
 Power-on at the device itself, or by remote control.
 Automatic power-down after ninety minutes without signal (only possible
with certain sources).
Off (Comfort standby):
The following expanded functions are available:

Unit can be switched on using the app.

Can be switched on using the FD100 radio remote control handset
(the FD100 is an optional accessory)

The automatic power-down function is disabled in Comfort standby mode.
All network settings can be carried out at this menu point. For a detailed
description on setting up a LAN or WLAN connection please also refer to the
section entitled "Network configuration" on page 48.
At this point you can enter the access data for the music streaming services
(TIDAL etc.) supported by the R 1000 E.
Calling up this menu point by pressing the  button displays a list of the
supported music services.
Select the service you wish to use, then confirm your choice with the 
button.
Now use the alpha-numeric keypad of the FM1000 to enter the access data
which you have received from your service provider in the lines "User" and
"Passphrase".
Use the  button to switch between numeric and alpha-numeric input, and
between capitals and lower-case letters.
Press the  button to erase any letter.
In each case confirm your input of user name and password by pressing the
 button.
To conclude the procedure and save the data, select the menu entry "Store
and exit?" and confirm by pressing the  button.

If access data for the selected music service has already been stored, the new
data will overwrite them. To use the new access data you must first perform a
"Logout" for the service in question, then switch the R 1000 E off and on again.

The music streaming services supported by the R 1000 E require a subscription
to the appropriate service provider.