Selecting CD as source
Inserting a CD
Front panel display
34
Operating the CD player
Select the CD player as source by pressing the button on the FM1000,
or by pressing the button on the front panel of the R 1000 E twice.
Open the CD drawer ( on the front panel / FM1000)
Place the disc centrally in the appropriate depression in the drawer, with the
side to be played facing down.
Close the CD drawer (on the front panel / FM1000)
When you close the drawer, the machine immediately reads the CD's 'Table
of Contents'; the screen displays the message 'Reading'. During this period
all button-presses are ignored.
The screen then displays the total number of tracks on the CD in the drawer,
e.g.: '13 Tracks
It is also shows the current mode of operation, e.g.
In CD mode the R 1000 E can be switched to either of two different screen
displays with a long press on the button:
Large-format display:
Enlarged display of the most important information, clearly legible even from
a distance
Detail display:
Small-text display showing a large number of additional information points,
e.g. bit-rate etc.
60:27'.
Fig.
Large format display
Fig.
Detail display