Problem Handling; Error Description - Vivax ACP-56COFM164GEEI User Manual

contact the local appointed service center and also give a description of the error occurred as well
as the model of the unit.
12.2

Problem Handling

The conditions listed below are not classified into errors.
Conditions
When restart the unit soon after it
is stopped
The unit does
not run
As soon as power supply is on
The unit blows When the cooling operation
out mist starts
The unit "clatters" as soon as it
starts running
The unit "swishes" during the
cooling operation
The unit The unit "swishes" when it is
generates started or stopped
noise
The unit "swishes" when it is in
and after the running
The unit "squeaks" when it is in
and after the running
The unit blows When the unit restarts after it is
out dust not used for a long time
The unit emits
When the unit is running
odors
12.3

Error Description

If some error occurs when the unit is running, the error code will be displayed on the wired
controller, the main board and the testing board of the outdoor unit. Check for more details about
the meaning of each error.
Errors of definition
The compressor is startup
IPM current protection
IPM temperature protection
PFC current protection
The overload protection switch of the unit let
the startup delayed for three minutes
The unit will stand by for approximate one
minute
The hi-humidity air indoor is cooled quickly
It is the sound generated during the
initialization of the electronic expansion valve
It is the sound when the refrigerant gas runs
inside the unit
It is the sound when the refrigerant gas stops
running
It is the sound when the draining system is
operating
It is the sound of frication generated by the
skin plate etc which swells due to the
temperature change
The dust inside the unit is blown out again
The odors absorbed in are blown out
Main control display for outdoor unit
Yellow LED Red LED
Flash 1 time
Flash 3
times
Flash 5
times
Flash 7
times
30
Causes
Indoor unit
code
Green LED
H5
P8
HC
Testing board
code
H5
P8
HC