Handling The Remote Controller - Vivax Y-DESIGN ACP-09CH25AEYIs R32 User Manual

ENG

HANDLING THE REMOTE CONTROLLER

NOT SURE WHAT A FUNCTION DOES? Refer to the How to Use Basic
Functions and How to Use Advanced Functions sections of this manual for
a detailed description of how to use your air conditioner.
SPECIAL NOTE
- Button designs on your unit may differ slightly from the example shown.
- If the indoor unit does not have a particular function, pressing that
function s button on the remote control will have no effect.
INSERTING AND REPLACING BATTERIES
The following cases signify exhausted batteries. Replace old batteries with new ones.
 Receiving beep is not emitted when a signal is transmitted.
 Indicator fades away.
The remote controller is powered by two dry batteries (R03/LR03X2)
housed in the back rear part and protected by a cover.
(1) Remove the cover in the rear part of the remote controller.
(2) Remove the old batteries and insert the new batteries placing the (+)
and (-) ends correctly.
(3) Install the cover back on
INSTALLING REMOTE CONTROL HOLDER
The remote controller can be attached to a wall or stand by using a remote controller
holder (optional part, not supplied with the unit).
1. Before installing the remote controller, check that the air conditioner receives
the signals properly.
2. Install the holder with two screws.
1. Put the remote controller in the holder.
BATTERY NOTES
For optimum product performance:
- Do not mix old and new batteries, or batteries of different types.
Do not leave batteries in the remote control if you don
-
for more than 2 months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted municipal waste. Refer to local laws for proper
disposal of batteries.
VIVAX
'
t plan on using the device