Installing The Machine; Filling The Water Tank - Grimac OPALE Operating Instructions Manual

20
- Use spare parts not recommended by the manufactur-
ing company.
- Make any technical modifi cations to the machine.
- Immerse the machine in any kind of liquid.
- Wash the machine using a water jet.
- Use the machine in ways diff erent than those described
in the manual.
- Use the machine in altered psychophysical conditions,
under the infl uence of drugs, alcohol, medicine etc.
- Install the machine on top of other appliances.
- Use the machine in explosive or harsh environments, or
with high concentration of dust or oily substances sus-
pended in the air.
- Use the machine in an environment in which a risk of fi re
exists.
- Use the machine to dispense substances other than
those it is designed for.
- Use the machine in locations with insuffi cient lighting.
• Before cleaning, ensure that the machine is off and the plug
is disconnected from the power socket; do not wash the ma-
chine with fuel and/or solvents of any kind.
• Each repair can only be performed by a Service Centre Au-
thorised by the Manufacturer and/or by specialised and
trained personnel.
• Do not clog grills placed in the machine.
• Do not place the machine near heating equipment (such as
stoves or radiators).
• In case of fi re, use carbon dioxide (CO
use water or dry powder extinguishers.

4. INSTALLING THE MACHINE

conducted by the Manufacturer to guarantee maximum
product quality.
Correctly install the machine before starting it.
After removing the machine from the packaging, proceed as fol-
lows:
• Place the machine on a stable horizontal surface.
• Make sure it is not accessible to children.
• Make sure there is enough space to perform all required op-
erations (use, maintenance, etc.).
• Keep it away from hot surfaces or open fl ames; keep the
machine at a distance of approximately 15 centimetres from
other devices.
• Make sure the machine is turned off and all switches are in
OFF position.
It is also advisable to avoid placing the machine in spaces of tran-
sit or narrow hallways, to avoid being struck.
parts. For further details, see the related section.
We recommend keeping the packaging for future transfers or
) extinguishers. Do not transportation.
2
4.1.
To operate the machine, fi ll the water tank. First of all, always
make sure that the machine is off and the plug is disconnected.
ated water may damage the machine. Before starting
the machine, make sure that there is always a suffi cient
quantity of water.
Note: The use of the machine without water in the tank
may aff ect the correct functioning of the machine.
• (Fig.1a) - Remove the metal outer lid.
• (Fig.1b) - Remove the lid of the tank.
• (Fig.2) - Remove the drip tray and the grill from the tank
(remove any packing bags if any).
• (Fig.3) - Place the tray and the grill in the machine.
• (Fig.4a) - Remove the hoses inside the tank.
• (Fig.4b) - Remove the softener fi lters inside the tank and
Note: In the machine there may be traces of cof-
fee and/or water, these are due to the testing
Before operating the machine for the fi rst time, it
is necessary to carry out a thorough cleaning of its

Filling the Water Tank

Warning: To fi ll the tank always and only use
fresh drinking water, as hot water or carbon-